Home   –   Contact Us
ICA M.W. 1200° – Hamfab Type 650° – H-Block Support Insulation – Aluminum Fittings Fitment – Proto Fitment

PRICE SHEETS:
- 45° Weld Ells
- 90° Weld Elbows
- Screwed 90° Ells
  & Socket Ells

FOR CUSTOMER SERVICE & ORDER PLACEMENT CALL:
P 610.377.6100
F 610.377.6101
service@icafittings.com

MSDS
 

ICA Mineral Wool 1200°

Screwed Ells, Socket Ells & Weld Tees

All Insulators Are Molded Two-Piece Units

NOTE:

  • Terms Net 30 Days
  • Freight F.O.B. Lehighton, PA
  • $2.50 Handling Charge on All Orders Under $25.00 Net
  • Sizes highlighted indicate to order next size O.D. on metal or plastic covers in order to insure adequate fit. O.D. of HAMFAB insulator will butt to adjoining straight-run insulation.

Screwed 45° Ells and 45° Socket Ells

Pipe Size Insulation Thickness
  1" 1 1/2" 2" 2 1/2"
1/2" 3.21 3.93 4.48  
6.67 3.27 4.10 4.91  
1" 3.29 4.22 5.38  
1 1/4" 3.74 4.50 5.57  
1 1/2" 4.15 4.91 5.68 7.67
2" 4.83 5.19 6.39  
2 1/2"   6.83    
3"   7.06 8.44  
4"   9.72    




Screwed 90° Ells and Socket Ells

Pipe Size Insulation Thickness
  1/2" 1" 1 1/2" 2" 2 1/2" 3" 3 1/2"
1/2" 2.80 4.02 4.92 5.61 6.67 9.13  
3/4" 2.86 4.10 5.11 6.13 6.75 10.82  
1"   4.13 5.29 6.73 8.47 10.95 17.05
1 1/4"   4.67 5.64 6.97 8.59 11.09  
1 1/2"   5.19 6.13 7.10 9.59 13.73  
2"   6.05 6.60 7.98 9.98 14.67 21.10
2 1/2"   6.60 8.55 10.20 12.15 18.26  
3"   7.73 8.84 10.54 13.04 18.68  
4"   10.11 12.15 14.53 17.42    

Screwed & Weld Tees

Pipe Size Insulation Thickness
  1" 1 1/2" 2" 2 1/2" 3" 3 1/2"
1/2" 4.41 5.38 6.14 7.29    
3/4" 4.48 5.60 6.71 7.38    
1" 4.51 5.79 7.37 9.29    
1 1/4" 5.11 6.18 7.63      
1 1/2" 5.66 6.71 7.78 10.50 15.03  
2" 6.60 7.25 8.73 10.93 16.07  
2 1/2"   9.35        
3"   9.67 11.54 14.30 20.88 31.24
4"   13.31 15.92 19.09 23.17  
6"   23.56 26.08      

*highlighted sizes require humped jackets

Our technical staff is ready to assist you!
For more data or free samples call us at 610-377-6100
or email us at service@icafittings.com.

Our Technical Staff is available to assist purchasers in obtaining the best results from our products. Recommendations are based upon tests and information believed to be reliable. However, since we have no control over the methods and conditions of application, transportation, storage or handling of our products, recommendations and sales are made on condition that we assume no responsibility beyond the purchase price of our material. No representative of our company has authority to change or extend this condition of sale.

Home – ICA 1200° – Hamfab 650° – H-Block – MSDS – Aluminum Fittings – Proto Fitment – Contact Us
Copyright 2011 ICA Fittings.com               Site by Fringe Marketing